If you’ve lost the manual or simply don’t have the time to look it up, there are a few things you can try to program your Onn remote without a code. First, try searching online for the model number of your remote and the brand of your TV.
There’s no need to be a tech whiz to program your Onn remote without a code. With just a few simple steps, you can get your remote working again in no time. The best part is that you don’t need any special tools or knowledge to do it. So, what are you waiting for? Grab your Onn remote and let’s get started!
First, you need to find the code for your TV. You can usually find this code on the back of your TV or in the user manual. If you can’t find the code, you can try searching for it online. Once you have the code, you need to enter it into your remote. To do this, press and hold the “Setup” button on your remote until the LED light starts blinking. Then, enter the code using the number buttons on your remote. Once you have entered the code, press the “Enter” button.
If the code you entered doesn’t work, you can try searching for other codes online. There are many websites that have databases of codes for different TVs. Once you have found a code that works, you can enter it into your remote using the steps above. Programming your Onn remote without a code is a simple process that can be completed in just a few minutes. By following the steps in this article, you can get your remote working again in no time.
Simple Steps for Programming ONN Remote Without Codes
Programming an ONN remote without codes is a straightforward process that can be completed in a few simple steps. Here’s how to do it:
Identify Your Device’s Brand and Model
To program your ONN remote without codes, you’ll need to know the brand and model of the device you want to control. This information can usually be found on the device itself or in its user manual. Once you have this information, you can proceed to the next step.
If you are unable to find the brand or model of your device, you can try using a universal remote code database to search for the appropriate codes. However, this method is not always reliable, and it may not work for all devices.
Search for Your Device’s Code
Once you have identified the brand and model of your device, you can start searching for its code. There are several ways to do this:
- Check the ONN remote manual: The manual for your remote may contain a list of codes for different devices.
- Use the ONN remote app: The ONN remote app allows you to search for codes for your device.
- Use a universal remote code database: There are several online databases that contain codes for different devices.
Program Your ONN Remote
Once you have found the code for your device, you can program it into your ONN remote. The process for doing this may vary depending on the model of your remote. However, the general steps are as follows:
- Turn on the device you want to control.
- Press and hold the “Setup” button on your ONN remote until the LED light blinks.
- Enter the code for your device.
- Press the “Enter” button.
If you have programmed your ONN remote correctly, it should now be able to control your device.
Identifying the Model and Device Type
Determining the Onn Remote Model
Distinguishing the specific model of your Onn remote is crucial. To ascertain this information, inspect the remote’s body closely. Typically, the model number is inscribed on a sticker attached to the back or bottom of the remote. If the model number is not prominently displayed, you can consult the user manual that came with the device or search online using the remote’s description.
Discovering the Device Type
Identifying the type of device you wish to control with the Onn remote is equally important. Onn remotes are compatible with a wide range of devices, including televisions, streaming boxes, and audio systems. To determine the device type, refer to the following table:
| Device Type | Method of Identification |
|---|---|
| Television | Look for specific buttons dedicated to controlling television functions, such as power, volume, and channel selection. |
| Streaming Box | Check for buttons that correspond to navigation and media playback functions, such as home, menu, and play/pause. |
| Audio System | Search for buttons related to audio controls, including volume, power, and input selection. |
Using Universal Codes as an Alternative
If you’re unable to locate the specific code for your TV or device, you can try using universal codes. These codes are generic and designed to work with a wide range of devices from different manufacturers. To use a universal code:
1. Gather your device and remote.
Make sure your TV or device is turned on and within range of your remote. Refer to your device’s user manual for any specific instructions on preparing it for remote programming.
2. Enter programming mode.
Check your remote’s user manual for instructions on entering programming mode. This typically involves pressing and holding a specific button, such as the “Setup” or “Program” button, for a few seconds.
3. Input the universal code.
Once you’re in programming mode, enter the universal code for your device. You can find a list of universal codes online or in your remote’s user manual. The most common universal codes for TVs are:
| Brand | Universal Codes |
|---|---|
| Samsung | 00150, 00156, 00071 |
| Sony | 00023, 00032, 00001 |
| LG | 00006, 00002, 00003 |
| Vizio | 00079, 00082, 00080 |
| TCL | 00098, 00099, 00100 |
If the universal code doesn’t work, try another one from the list. Once you’ve entered a code, press the “Enter” or “OK” button on your remote to save it. Test the remote to see if it’s working properly with your device.
Pairing the Remote with the TV via Bluetooth
If your Onn remote and TV support Bluetooth, you can pair them for a wireless connection. Here’s how:
1. Enable Bluetooth on Your TV
Navigate to the Settings menu on your TV and find the Bluetooth option. Enable Bluetooth and make sure your TV is discoverable.
2. Put the Remote into Pairing Mode
Press and hold the “Home” button on the remote for about 5 seconds until the LED light starts blinking rapidly. This indicates that the remote is in pairing mode.
3. Discover and Pair the Remote
Go back to your TV’s Bluetooth settings and look for the Onn remote in the list of available devices. Select the remote to pair it.
4. Troubleshooting Bluetooth Pairing Issues
If you encounter issues while pairing the remote via Bluetooth, here are some tips:
- Make sure both the TV and remote have Bluetooth enabled.
- Ensure that the remote is within range of the TV (usually around 30 feet).
- Check if there are any other Bluetooth devices nearby that may be interfering with the connection.
- Try restarting both the TV and remote.
- If pairing still fails, reset the remote to factory settings and try again.
| Issue | Possible Solution |
|---|---|
| Remote won’t pair | Restart both TV and remote. Ensure Bluetooth is enabled on both devices. Check for interference. |
| Pairing successful but remote doesn’t work | Try re-pairing the remote. Reset the remote to factory settings if necessary. |
| Remote works intermittently | Check for Bluetooth interference. Make sure remote is within range. Replace batteries if weak. |
Exploring the Smart Remote App
The Smart Remote App is a convenient and user-friendly tool that allows you to control your Onn Remote without the need for codes. The app offers a wide range of features, including:
- Remote control: Use the app to navigate your TV, including power, volume, channel, and menu controls.
- Voice control: Speak into the app to search for channels, launch apps, and control your TV hands-free.
- Smart home integration: Control compatible smart home devices, such as lights, thermostats, and door locks, from the app.
- Customizable buttons: Create custom buttons to access frequently used functions with just a tap.
- Activity control: Set up activities, such as “Watch TV” or “Movie Night,” to control multiple devices with a single button.
Here’s a table detailing the steps for setting up the Smart Remote App:
| Step | Instructions |
|---|---|
| 1 | Download the Smart Remote App from the App Store or Google Play. |
| 2 | Open the app and follow the on-screen instructions to connect to your Onn Remote. |
| 3 | Select your TV brand and model from the app’s list. |
| 4 | The app will automatically configure your remote with the correct settings. |
| 5 | Customize your remote buttons, set up activities, and enjoy the convenience of controlling your TV without codes. |
Troubleshooting Common Programming Issues
When programming your Onn remote without code, you may encounter certain issues. Here are some common problems and their solutions:
1. Remote doesn’t respond
Ensure that the batteries are fresh and make sure the battery compartment is clean. Check if the remote is pointed directly at the TV from a close distance.
2. Some buttons don’t work
Clean the buttons with a cotton swab and rubbing alcohol. If a button is stuck, gently press and release it several times.
3. TV turns off unexpectedly
Verify that the remote is not set to turn off the TV after a specific time. Check if the TV’s auto power-off feature is disabled.
4. Remote controls multiple devices
Your remote may have a universal programming mode. Follow your remote’s manual to set it to control only your TV.
5. Remote doesn’t turn on the TV
Make sure that the code you entered is correct. Try using the manufacturer’s direct code if the code search method doesn’t work.
6. Remote works intermittently
Check for obstructions between the remote and the TV. The remote’s sensors may be faulty, requiring replacement. Here are possible causes and solutions for intermittent remote performance:
| Cause | Solution |
|---|---|
| Weak batteries | Replace with new batteries |
| Obstructions | Remove any objects blocking the path between remote and TV |
| Dirty remote sensors | Clean sensors on the remote using a cotton swab and rubbing alcohol |
| Faulty remote | Check if the remote is still under warranty and contact the manufacturer for replacement options |
Resetting the Remote to Factory Settings
If your Onn remote is not functioning properly, resetting it to factory settings may resolve the issue. Follow these steps:
1. **Remove the batteries from the remote**. This will erase all the programmed settings.
2. **Press and hold the “Home” button for 5 seconds**. This will trigger the factory reset process.
3. **While continuing to hold the “Home” button, reinsert the batteries into the remote**. Keep holding the “Home” button until the LED light starts blinking.
4. **Release the “Home” button when the LED light stops blinking**. The remote is now reset to factory settings.
Detailed Instructions for Step 7
When the LED light stops blinking, it indicates that the reset process is complete. However, it’s important to follow some specific steps to ensure the process is successful:
- Once the LED light stops blinking, release the “Home” button immediately.
- Do not continue holding the “Home” button after the LED light turns off.
- If the LED light starts blinking again after releasing the “Home” button, repeat the reset process from step 1.
| Action | Duration |
|---|---|
| Press and hold “Home” button | 5 seconds |
| Hold “Home” button while inserting batteries | Until LED light blinks |
| Release “Home” button | When LED light stops blinking |
Manually Entering Codes for Specific Devices
To manually enter codes for a specific device, follow these steps:
1. Turn on the device you want to control with the remote.
2. Press and hold the “SET” button on the remote for 5 seconds until the LED light starts flashing.
3. Enter the 5-digit code for your device using the number buttons on the remote.
4. Press the “SET” button again to save the code.
5. Test the remote by pressing the power button on the remote and checking if the device turns on or off.
6. If the device does not respond, try entering the code again or using a different code from the list of codes provided below.
ONN TV Codes
| Code | Model |
|---|---|
| 10171 | ONN 32″ Smart TV |
| 10172 | ONN 40″ Smart TV |
| 10173 | ONN 43″ Smart TV |
Other Device Codes
For codes for other devices, refer to the user manual of the specific device or check the code list on the manufacturer’s website.
How To Program Onn Remote Without Code
Turn on your TV and Onn remote.
Press and hold the “Pause” and “Rewind” buttons simultaneously for 3 seconds.
Enter the 3-digit code for your TV brand using the number buttons (see the table below).
Press the “Power” button to save the code.
Test the remote by pressing different buttons.
Tips for Optimizing Remote Performance
1. Use fresh batteries
Weak batteries can cause the remote to lag or malfunction. Replace the batteries every 3-6 months to ensure optimal performance.
2. Point the remote directly at the TV
The remote needs a clear line of sight to the TV’s IR sensor. Avoid pointing it at an angle or through obstacles.
3. Clean the remote’s sensor
Dust or dirt on the remote’s sensor can interfere with its signal. Use a soft cloth or cotton swab to gently clean the sensor.
4. Avoid interference from other devices
Other electronic devices, such as fluorescent lights or wireless routers, can emit IR signals that can interfere with the remote. Move the remote away from these devices or turn them off.
5. Reset the remote
If the remote is not functioning properly, try resetting it. Remove the batteries, wait a few seconds, and then reinsert them.
6. Update the remote’s firmware
Some Onn remotes can be updated with firmware updates. Check the manufacturer’s website for available updates and follow the instructions to install them.
7. Use a universal remote
If you have multiple devices, consider using a universal remote. This will simplify your remote setup and reduce the risk of interference.
8. Test the remote’s functionality
After programming the remote, test its functionality by pressing different buttons. If any buttons are not working, repeat the programming process or contact the manufacturer for assistance.
9. Troubleshooting Tips
If you are having trouble programming your Onn remote, try the following troubleshooting tips:
| Issue | Solution |
|---|---|
| The remote is not responding |
|
| The remote is controlling the wrong device |
|
| Certain buttons are not working |
|
How To Program Onn Remote Without Code
No detailed instructions are provided for programming an Onn remote without a code. However, it should involve setting the remote to the appropriate mode and entering the code for your TV or device. The specific steps may vary depending on your remote model, so it’s best to refer to the user manual or contact the manufacturer for assistance.
Additional Resources for Programming Assistance
If you need further assistance with programming your Onn remote, here are some additional resources:
User Manual
The user manual for your remote should provide detailed instructions on programming it. You can find the user manual online or on the manufacturer’s website.
YouTube Videos
There are many helpful YouTube videos that can show you how to program your Onn remote. Simply search for “how to program onn remote” and you will find a variety of videos to choose from.
Online Forums
There are several online forums where you can ask questions and get help from other users. Some popular forums include AVS Forum and Home Theater Forum.
Customer Support
If you are still having trouble programming your remote, you can contact customer support for assistance. You can find the customer support information on the manufacturer’s website.
Programming Codes
In some cases, you may need to enter a programming code to pair your remote with your TV or device. You can find the programming codes online or on the manufacturer’s website.
Steps to Program Onn Remote
To program your Onn remote, follow these steps:
1. Turn on your TV or device.
2. Point the remote at the TV or device and press and hold the “TV” or “Device” button until the light on the remote flashes.
3. Enter the programming code for your TV or device. You can find the programming codes online or on the manufacturer’s website.
4. Press the “Enter” button on the remote.
5. The remote should now be programmed to control your TV or device.
| Step | Action |
|---|---|
| 1 | Turn on your TV or device. |
| 2 | Point the remote at the TV or device and press and hold the “TV” or “Device” button until the light on the remote flashes. |
| 3 | Enter the programming code for your TV or device. You can find the programming codes online or on the manufacturer’s website. |
| 4 | Press the “Enter” button on the remote. |
| 5 | The remote should now be programmed to control your TV or device. |
