Armitron digital watches are designed to keep you organized and on time. However, when daylight saving time or other circumstances require you to adjust the time, it’s essential to know how to do it correctly. This guide will provide step-by-step instructions on how to effortlessly change the time on your Armitron digital watch. Whether you’re a seasoned watch enthusiast or new to digital timepieces, this article has got you covered.
The process involves a simple sequence of button presses. Begin by locating the “Mode” button on your watch. Typically, it’s situated on the side of the watch. Pressing this button repeatedly will cycle through different display modes, including the time, date, and other settings. Once the time mode is displayed, you can proceed to adjust the hours, minutes, and seconds as needed. To do this, use the “+” and “-” buttons, usually located on the opposite side of the watch. Hold down the “+” button to increment the time, and the “-” button to decrement it.
Once you’ve set the correct time, press the “Mode” button again to exit the time setting mode. The new time will be saved, and your watch will display the updated information. Additionally, some Armitron digital watches may have dedicated buttons for adjusting the hour, minute, and second values directly. Locate these buttons if present and use them for quicker time adjustments. Remember to consult the user manual for your specific watch model for any variations in button functions or procedures.
Understanding the Button Layout
Armitron digital watches typically have four buttons arranged in a specific layout. Each button serves a different function in setting and adjusting the time. Let’s break down the button layout:
Mode Button
Typically labeled with the letter “M,” the mode button allows you to cycle through different display modes on the watch. These modes may include time, date, stopwatch, timer, and more.
Time Adjustment Buttons
There are typically two time adjustment buttons: one labeled “+” or “Set” and one labeled “-” or “Adj.” These buttons are used to adjust the time forward or backward when setting the correct time.
Chrono / Reset Button
The chrono / reset button is often used to start and stop the stopwatch function. Additionally, it may also be used to reset the stopwatch or timer when necessary.
| Button | Function |
|---|---|
| Mode | Cycle through display modes |
| Time Adjustment (+) | Increase time value |
| Time Adjustment (-) | Decrease time value |
| Chrono / Reset | Start/stop stopwatch; reset stopwatch/timer |
Entering Time Change Mode
To enter time change mode on an Armitron digital watch, follow these steps:
-
Press and hold the mode button for 3 seconds. The watch will enter time change mode, and the time will start flashing.
-
Use the adjust button to change the hours. Press and hold the adjust button to quickly change the hours, or press it once to advance the hours by one.
-
Press the mode button to move to the minutes. The minutes will start flashing.
-
Use the adjust button to change the minutes. Press and hold the adjust button to quickly change the minutes, or press it once to advance the minutes by one.
-
Press the mode button to save the changes and exit time change mode. The time will stop flashing and the watch will return to normal mode.
Here is a table summarizing the steps:
| Step | Action |
|---|---|
| 1 | Press and hold the mode button for 3 seconds. |
| 2 | Use the adjust button to change the hours. |
| 3 | Press the mode button to move to the minutes. |
| 4 | Use the adjust button to change the minutes. |
| 5 | Press the mode button to save the changes and exit time change mode. |
Altering Hour Value
The third button, labeled “Mode,” is used to alter the hour value. Press and release the mode button once to enter the hour setting mode. The hour digits will begin to flash. Use the “+/-” buttons to increase or decrease the hour value. Once the desired hour is set, press the “Mode” button again to save the changes and exit the hour setting mode.
| Button | Function |
|---|---|
| Mode | Enters and exits hour setting mode |
| +/− | Increases or decreases hour value |
Here’s a step-by-step guide to altering the hour value:
- Press the “Mode” button once.
- Use the “+/-” buttons to set the desired hour.
- Press the “Mode” button again to save changes.
Note: If you press the “Mode” button again before pressing the “+/-” buttons, the watch will exit the hour setting mode without saving any changes.
Setting the Minutes
To set the minutes on your Armitron digital watch, follow these steps:
- Press the “Mode” button repeatedly until the minutes digits are flashing.
- Press the “Set” button to begin adjusting the minutes.
- Use the “Up” and “Down” buttons to increase or decrease the minutes by one.
- Hold down the “Up” or “Down” buttons to quickly scroll through the minutes.
- Once the correct minutes are set, press the “Mode” button to save the changes.
Holding the Up or Down Buttons to Quickly Scroll
When you hold down the “Up” or “Down” buttons, the minutes will scroll rapidly. This can be helpful when you need to make large adjustments.
| Button | Function |
|---|---|
| Up | Increase minutes |
| Down | Decrease minutes |
The speed at which the minutes scroll will vary depending on the model of your watch. Some watches will scroll faster than others.
Saving Time Changes
To change the time on your Armitron digital watch during Daylight Saving Time changes, follow these steps:
- Press and hold the MODE button for two seconds to enter the time setting mode.
- Use the UP or DOWN buttons to adjust the hour to the correct time.
- Press the MODE button to confirm the hour and move to the minute setting.
- Use the UP or DOWN buttons to adjust the minute to the correct time.
- Press the MODE button to confirm the minute and exit the time setting mode.
- Locate the “Mode” button on the watch.
- Press and hold the “Mode” button until you enter “Timekeeping” mode.
- Press the “Set” or “Adjust” button to select the time format option.
- Use the “Up” or “Down” buttons to toggle between 12H (12-hour format) and 24H (24-hour format).
- Once you have selected the desired time format, press the “Set” or “Adjust” button to confirm your selection.
- After selecting the 12H format, press the “Set” or “Adjust” button to enter the AM/PM settings.
- Use the “Up” or “Down” buttons to toggle between the 12-hour and 10-hour formats.
- Press the “Set” or “Adjust” button to confirm your selection.
- Press the “Mode” button repeatedly to cycle through the display modes until you reach the “Time Set” mode.
- Hold down the “Adjust” button for at least five seconds until the seconds start flashing.
- Release the “Adjust” button.
- Press the “Adjust” button again to set the hour to “12:00.”
- Press the “Mode” button to move to the minutes field.
- Press the “Adjust” button to set the minutes to “00.”
- Press the “Mode” button to move to the seconds field.
- Press the “Adjust” button to set the seconds to “00.”
- Once the time is set to 12:00:00, press and hold the “Mode” button for at least three seconds to save the settings and return to the normal timekeeping mode.
- Press the “Mode” button repeatedly until the time display flashes.
- Use the “+” and “-” buttons to adjust the hour.
- Press the “Mode” button to move to the minute setting.
- Use the “+” and “-” buttons to adjust the minute.
- Press the “Mode” button again to confirm the new time.
Note: If your watch is set to automatic time update, it will automatically adjust for Daylight Saving Time changes.
However, you may need to manually adjust the time if the automatic time update is not working properly.
AM/PM Settings
Armitron digital watches generally display time in 12-hour format, including an AM/PM indicator. To change the AM/PM settings:
Customizing 12H Format
If you have selected the 12H format, you can further customize the AM/PM settings by specifying whether the watch operates in a 12-hour or 10-hour format. To do this:
| 12-Hour Format | 10-Hour Format |
|---|---|
| Use 12-hour clock display | Use 10-hour clock display (omitting “AM” or “PM” indicators) |
24-Hour Format Adjustments
The Armitron digital watch offers the versatility to display time in either a 12-hour or 24-hour format. To adjust the watch to display time in the 24-hour format:
Step 1: Access Timekeeping Mode
Press the “TIME” button once to enter the timekeeping mode.
Step 2: Navigate to the Hour Setting
Press the “ADJ” button repeatedly until the hour digits begin to flash.
Step 3: Set the Hour
Toggle the “UP” or “DOWN” buttons to set the desired hour value. Ensure the hour value is between 00 and 23, representing midnight to 11:00 PM.
Step 4: Confirm Hour Setting
Press the “ADJ” button again to confirm the hour setting.
Step 5: Set the Minutes
Toggle the “UP” or “DOWN” buttons to adjust the minute value. Ensure the minute value is between 00 and 59.
Step 6: Confirm Minute Setting
Press the “ADJ” button to confirm the minute setting.
Step 7: Set the Time Format
Press the “LAP/RESET” button once. The time format will toggle between 12-hour and 24-hour formats. For 24-hour format, the time display will change from “12:30 PM” to “12:30”.
Step 8: Exit Timekeeping Mode
Press the “TIME” button to exit the timekeeping mode and return to the normal time display.
Resetting to Factory Time
If you’ve made multiple time adjustments and want to revert to the original factory settings, follow these steps:
Note that resetting to factory time will erase any custom settings you’ve made, such as alarms and timers.
Turn On the Watch
Press and hold the “Mode” button for a few seconds until the display turns on. The watch will enter the timekeeping mode.
Set the Current Time
Press the “Mode” button once to enter the time-setting mode. The hours will start flashing.
Use the “+” and “-” buttons to adjust the hours. Hold down the button to change the value quickly.
Once you have set the hours, press the “Mode” button to move to the minutes.
Use the “+” and “-” buttons to adjust the minutes. Hold down the button to change the value quickly.
Press the “Mode” button to exit the time-setting mode and return to the timekeeping mode.
Toggle Between 12-Hour and 24-Hour Time
Press and hold the “Mode” button for a few seconds until the 12-hour or 24-hour time format starts flashing.
Use the “+” and “-” buttons to toggle between the two formats. Hold down the button to change the value quickly.
Press the “Mode” button to exit the time-setting mode and return to the timekeeping mode.
Set the Alarm
Press the “Alarm” button to enter the alarm-setting mode. The alarm time will start flashing.
Use the “+” and “-” buttons to adjust the hours and minutes of the alarm.
Press the “Alarm” button to exit the alarm-setting mode and return to the timekeeping mode.
Turn On/Off the Alarm
Press the “Alarm” button to turn on or off the alarm.
When the alarm is on, the alarm icon will appear on the display.
Stop the Alarm
When the alarm sounds, press any button to stop it.
Set the Timer
Press the “Timer” button to enter the timer-setting mode. The timer time will start flashing.
Use the “+” and “-” buttons to adjust the hours, minutes, and seconds of the timer.
Press the “Timer” button to exit the timer-setting mode and return to the timekeeping mode.
Start/Stop the Timer
Press the “Start/Stop” button to start or stop the timer.
When the timer is running, the timer icon will appear on the display.
Reset the Timer
Press the “Reset” button to reset the timer to zero.
Additional Settings (if applicable)
Some Armitron digital watches may have additional settings, such as the ability to adjust the backlight brightness, set the date, or switch between different time zones.
Set the Stopwatch
Press the “Stopwatch” button to enter the stopwatch mode.
Press the “Start/Stop” button to start or stop the stopwatch.
Press the “Reset” button to reset the stopwatch to zero.
Set the Chronograph
Press the “Chronograph” button to enter the chronograph mode.
Press the “Start/Stop” button to start or stop the chronograph.
Press the “Reset” button to reset the chronograph to zero.
Set the Countdown Timer
Press the “Countdown Timer” button to enter the countdown timer mode.
Use the “+” and “-” buttons to adjust the hours, minutes, and seconds of the countdown timer.
Press the “Start/Stop” button to start or stop the countdown timer.
When the countdown timer reaches zero, the alarm will sound.
Press the “Reset” button to reset the countdown timer to zero.
Set the Dual Time
Press the “Dual Time” button to enter the dual time mode.
Use the “+” and “-” buttons to adjust the hours and minutes of the dual time.
Press the “Dual Time” button to exit the dual time mode and return to the timekeeping mode.
Setting the Time on an Armitron Digital Watch
To adjust the time on your Armitron digital watch, follow these steps:
Troubleshooting Common Issues
1. The watch is not responding to button presses.
Check the battery and replace it if necessary. Ensure the battery is inserted correctly with the positive (+) terminal facing upwards.
2. The time is not accurate.
Synchronize your watch with a reliable time source, such as a phone or laptop. Refer to the watch’s manual for specific instructions on how to do this.
3. The watch is showing the wrong date.
Adjust the date according to your current location and the watch’s time format (12-hour or 24-hour).
4. The watch is not displaying anything on the screen.
Check the battery and replace it if necessary. Ensure the battery is inserted correctly with the positive (+) terminal facing upwards.
5. The watch is stuck in a certain mode.
Press the “Mode” button repeatedly until you exit the current mode and return to the time display.
6. The watch is not waterproof.
Avoid exposing your watch to excessive water. Refer to the watch’s manual for specific water resistance specifications.
7. The watch has scratches or other damage.
Inspect the watch for any scratches or dents. If necessary, take it to a jeweler or watch repair professional for repairs.
8. The watch is not charging.
Ensure that the charging cable is properly connected to the watch and the power source. Allow the watch to charge for the recommended amount of time.
9. The watch is not connecting to my phone.
Make sure that both the watch and your phone have Bluetooth enabled. Check if the watch and phone are within Bluetooth range and that there are no obstructions.
10. Other Issues.
If you encounter any other issues that are not addressed above, consult the watch’s manual or contact Armitron’s customer support for assistance.
| Issue | Solution |
|---|---|
| The watch is not turning on | Replace the battery or charge the watch |
| The buttons are not working | Clean the buttons or take the watch to a jeweler |
| The watch is not keeping time | Synchronize the watch or replace the battery |
How to Change Time on Armitron Digital Watch
1. Pull out the crown to the first position. The second hand will stop at 12:00 position.
2. Rotate the crown clockwise to adjust the hour. Pull out the crown to the second position to adjust the minutes. Rotate the crown clockwise to increase the minutes and counterclockwise to decrease the minutes. Press the crown back to the first position to save the changes.
3. Pull out the crown to the third position to adjust the seconds. Rotate the crown clockwise to increase the seconds and counterclockwise to decrease the seconds. Press the crown back to the second position to save the changes.
4. Push the crown back to the normal position. The watch will start running again.
People Also Ask about How to Change Time on Armitron Digital Watch
How do I set the date on my Armitron digital watch?
To set the date on your Armitron digital watch:
1. Pull out the crown to the first position. The second hand will stop at 12:00 position.
2. Rotate the crown counterclockwise to adjust the date. Press the crown back to the first position to save the changes.
3. Push the crown back to the normal position. The watch will start running again.
How do I change the time mode on my Armitron digital watch?
To change the time mode on your Armitron digital watch:
1. Press and hold the mode button until the display enters the time mode.
2. Press the mode button repeatedly to cycle through the different time modes.
3. Press the set button to select the desired time mode.
