Displaying your skateboard on the wall is a great way to show off your favorite deck and add some style to your home décor. But how do you hang a skateboard on the wall without damaging it? Here’s a step-by-step guide to help you get the job done right.
First, you’ll need to gather a few supplies. You’ll need two screws, two washers, two nuts, and a screwdriver. You’ll also need a level to make sure your skateboard is hanging straight. Once you have all of your supplies, you can begin the process of hanging your skateboard on the wall.
Start by measuring the distance between the two holes on the back of your skateboard. Then, mark this distance on the wall using a pencil. Next, use a level to make sure the marks are level. Once you’re sure the marks are level, you can drill two holes into the wall at the marks. The holes should be big enough to fit the screws. Once the holes are drilled, you can insert the screws into the holes. Then, place a washer on each screw and tighten the nuts onto the screws. Finally, hang your skateboard on the screws.
Choosing the Right Mounting Hardware
Selecting the appropriate mounting hardware for your skateboard is crucial for ensuring a secure and visually appealing display on your wall. There are various hardware options available, each with its own set of advantages and considerations:
Screws and Drywall Anchors
Screws and drywall anchors are a common and straightforward mounting solution. Screws provide a strong and permanent hold, while drywall anchors allow for secure installation in hollow walls. Choose screws that are long enough to penetrate the wall and anchor by at least 1 inch. For drywall anchors, choose the appropriate size and type for the thickness and density of your wall.
Nails
Nails are a quick and easy option for hanging skateboards, but they provide less support than screws and anchors. Use nails that are long enough to provide a solid grip in the wall, and consider using multiple nails for added stability. However, nails may damage the wall or leave unsightly holes when removed, so weigh these factors before using them.
Hooks
Hooks provide a convenient and versatile way to hang skateboards without drilling into the wall. Over-the-door hooks can be easily attached to a door frame, while adhesive hooks can be mounted on any smooth surface. However, hooks may not be as secure as screws or anchors, and they can be prone to slipping or falling if not properly installed.
Custom Brackets
If you prefer a more personalized or decorative display, consider using custom brackets designed for skateboards. These brackets are typically made from metal or wood and can be designed with specific features to enhance the aesthetics of your wall display. However, custom brackets can be more expensive than standard mounting hardware, and they may require professional installation.
Preparing the Skateboard
1. Cleaning the Skateboard
Before you hang your skateboard on the wall, you need to clean it. This will remove any dirt or debris that could damage the finish of your board. To clean your skateboard, use a damp cloth and a mild soap solution. Be sure to dry your skateboard thoroughly after cleaning it.
2. Removing the Trucks and Wheels
Once your skateboard is clean, you need to remove the trucks and wheels. This will make it easier to hang your skateboard on the wall. To remove the trucks, use a skate tool to loosen the bolts that hold them in place. Once the trucks are loose, you can remove the wheels. To remove the wheels, simply press down on the axle and pull the wheel off.
| Part | Tool |
|---|---|
| Trucks | Skate tool |
| Wheels | None |
3. Protecting the Trucks and Wheels
Once you have removed the trucks and wheels, you need to protect them from damage. To protect the trucks, you can wrap them in bubble wrap or cloth. To protect the wheels, you can put them in a bag or box.
Installing the Mounting Bracket
Step 1: Marking the Bracket Locations
Begin by identifying the desired height and angle for your skateboard on the wall. Use a level and a pencil to mark the center point for the upper and lower mounting brackets.
Step 2: Pre-Drilling Holes
Use a drill with a bit slightly smaller than the screw diameter to pre-drill pilot holes at the marked locations. This will prevent the wood from splitting when the screws are driven in.
Step 3: Installing the Upper Bracket
- Place the upper bracket against the wall, aligning it with the top center point.
- Use a screwdriver to drive a screw into the pilot hole, securing the bracket to the wall.
- Repeat the process on the other side of the skateboard, installing the other upper bracket.
Step 4: Installing the Lower Bracket
- Place the lower bracket in the center of the skateboard, aligning it with the lower center point.
- Use a screwdriver to drive a screw into each of the pilot holes, securing the bracket to the skateboard.
- Repeat the process on the other side of the skateboard, installing the other lower bracket.
Step 5: Ensuring Security
Once both brackets are installed, give them a firm wiggle to ensure they are securely attached. If they move, tighten the screws further until they are snug.
Measuring and Leveling the Skateboard
Once you have selected your desired location, it’s time to measure and level the skateboard. This step is crucial to ensure that your skateboard hangs straight and securely on the wall.
Start by measuring the distance between the two holes on the skateboard. This will give you the distance between the two nails or screws that you will be using to hang it.
Next, mark the location of the nails or screws on the wall using a pencil. Use a level to make sure that the marks are level. If the marks are not level, your skateboard will hang crooked.
Once you have marked the locations of the nails or screws, drill pilot holes at each mark. Pilot holes help to prevent the wood from splitting when you drive in the nails or screws.
Now, insert the nails or screws into the pilot holes. Leave about 1/2 inch of the nail or screw exposed. This will give you something to hang the skateboard on.
To hang the skateboard, simply place the holes on the skateboard over the nails or screws. The skateboard should hang securely on the wall.
Tips for Measuring and Leveling
- Use a measuring tape to accurately measure the distance between the holes on the skateboard.
- Use a level to ensure that the marks on the wall are level. A crooked skateboard will look unsightly.
- Drill pilot holes to prevent the wood from splitting. This is especially important if you are using drywall anchors.
- Leave about 1/2 inch of the nail or screw exposed. This will give you something to hang the skateboard on.
Optional Step: Using a Template
If you want to be extra precise, you can create a template to use when hanging your skateboard. To make a template, simply trace the outline of your skateboard onto a piece of paper. Then, mark the locations of the holes on the paper.
When you are ready to hang the skateboard, simply place the template on the wall and line it up with the marks. Then, drill pilot holes at the marked locations and insert the nails or screws.
Using a template is a great way to ensure that your skateboard hangs perfectly straight on the wall.
Hanging the Skateboard
1. Assembling and gathering the necessary materials
You will need a screwdriver, two screws, two wall anchors, two rubber washers, and two metal washers.
2. Position the skateboard
Measure and mark the desired height and position of the skateboard on the wall.
3. Drilling the holes
Mark the screw holes on the wall using a pencil and drill holes slightly smaller than the diameter of the wall anchors.
4. Inserting the wall anchors
Insert the wall anchors into the holes and tap them in with a hammer until they are flush with the wall.
5. Attaching the Rubber Washers
Rubber washers are placed under the truck mounting hardware. This will keep the mounting hardware from damaging the skateboard.
| Place washer: | On each side: |
|---|---|
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
| 4 | 4 |
| 5 | 5 |
6. Mounting the skateboard
Hold the skateboard against the wall and align the holes with the anchors. Insert the screws through the rubber washers, metal washers, and into the anchors. Tighten the screws with a screwdriver until the skateboard is securely mounted.
Securing the Skateboard
Once you have chosen the perfect spot to display your skateboard, it’s time to secure it to the wall. There are several methods you can use, depending on the type of wall and the weight of the skateboard. Here are some detailed instructions for each method:
Using Drywall Anchors
- Mark the desired location for the skateboard on the wall.
- Using a drill, make a pilot hole at the marked location.
- Insert a drywall anchor into the pilot hole and tap it flush with the wall.
- Align the skateboard with the drywall anchor and insert a screw through the mounting holes of the skateboard and into the anchor.
- Tighten the screw until the skateboard is securely attached to the wall.
- Repeat this process for all four mounting holes on the skateboard.
Using Toggle Bolts
- Mark the desired location for the skateboard on the wall.
- Using a drill, make a pilot hole at the marked location.
- Insert a toggle bolt into the pilot hole and push it through until the toggle wings are open behind the wall.
- Align the skateboard with the toggle bolt and insert a screw through the mounting holes of the skateboard and into the toggle bolt.
- Tighten the screw until the skateboard is securely attached to the wall.
- Repeat this process for all four mounting holes on the skateboard.
Using French Cleats
- Cut two french cleats to the desired length.
- Attach one french cleat to the back of the skateboard using wood screws.
- Attach the other french cleat to the wall at the desired location using wood screws.
- Align the skateboard with the french cleat on the wall and slide it into place.
- The weight of the skateboard will keep it securely attached to the wall.
Additional Tips for Securing the Skateboard
Here are some additional tips to ensure that your skateboard is securely attached to the wall:
- Use the appropriate screws for the type of drywall or wall material you are using.
- Make sure that the screws are long enough to penetrate the skateboard and into the wall by at least 1 inch.
- If the skateboard is particularly heavy, consider using additional mounting points or a more robust mounting system.
Mounting Hardware
Choose the appropriate mounting hardware based on the weight of your skateboard and desired display angle. For lightweight boards, simple screws or nails may suffice. For heavier boards or vertical displays, opt for sturdy brackets or hooks.
Drilling Holes
Measure and mark the desired screw or nail holes on the skateboard. Use a drill or hammer to create holes that are slightly smaller than the diameter of your mounting hardware.
Inserting the Hardware
Insert the screws or nails into the prepared holes and tighten them securely using a screwdriver or hammer. Ensure that the hardware is flush with the surface of the skateboard.
Hanging the Skateboard
Align the holes in the skateboard with the mounting hardware on the wall and carefully hang the board. If using brackets or hooks, slide the skateboard onto the supports and secure it according to the instructions provided.
Leveling and Aligning
Use a level to ensure that the skateboard is hanging straight and at the desired angle. Adjust the mounting hardware as necessary to achieve the correct alignment.
Preventing Scratches
To prevent scratches, consider placing felt or rubber pads between the skateboard and the mounting hardware. This will help protect the surface of the board.
Adding Decorative Touches (Optional)
Create a Shadowbox
Frame your skateboard in a shadowbox with a depth that accommodates the trucks. This will create a clean and polished display.
Add Lighting
Install LED strips or puck lights around the skateboard to highlight its graphics and details.
Custom Paint or Stain
Give your skateboard a unique look by repainting or staining it. Choose colors and patterns that complement your décor or personal style.
Table: Recommended Hardware for Skateboard Mounting Weight of Skateboard Recommended Hardware Lightweight (under 5 lbs.) Screws or nails Medium (5-10 lbs.) Brackets or hooks Heavyweight (over 10 lbs.) Heavy-duty brackets or hooks Safety Precautions
Before you start hanging your skateboard on the wall, it’s important to take some safety precautions. Here are a few things to keep in mind:
1. Wear eye protection.
When using power tools, it’s always important to wear eye protection. This will help to protect your eyes from flying debris.
2. Use a drill bit that’s the right size for the screws you’re using.
If you use a drill bit that’s too small, the screws won’t be able to hold the skateboard securely. If you use a drill bit that’s too large, you could damage the skateboard.
3. Drill the holes straight into the wall.
If you drill the holes at an angle, the skateboard won’t hang straight on the wall. Make sure you’re drilling on a secure wall so it doesn’t collapse or break.
4. Use screws that are long enough to reach into the studs.
If you use screws that are too short, they won’t be able to hold the skateboard securely. Make sure the proper size screws and anchors are being used on the appropriate wall type.
5. Hang the skateboard at a height that’s comfortable for you to reach.
If you hang the skateboard too high, you won’t be able to easily take it down. If you hang it too low, it could get in the way.
6. Make sure the skateboard is level.
If the skateboard isn’t level, it could fall off the wall. Use a level to make sure the skateboard is straight before you tighten the screws.
7. Use a wall anchor if you’re hanging the skateboard on drywall.
Drywall is a soft material, so it’s important to use a wall anchor to prevent the screws from pulling out.
8. Consider the weight of your skateboard.
If you have a heavy skateboard, you may need to use more than two screws to hang it. You may need to use special anchors to support the weight of the skateboard and securely mount it.
Wall Type Anchor Drywall Plastic anchor, Toggle bolt Plaster Molly bolt Concrete Concrete anchor Brick Masonry anchor Finding the Right Height
The ideal height for hanging your skateboard depends on your personal preference. However, a good rule of thumb is to hang it around 3-4 feet off the ground. This will make it easy to access and show off without getting in the way.
Using the Right Hardware
Make sure to use the correct hardware for your wall and skateboard. Heavy-duty screws and anchors are recommended for most skateboards. If you’re hanging on a softer wall material, such as drywall, you may need to use special wall plugs.
Leveling the Skateboard
Once your hardware is in place, use a level to ensure that the skateboard is hanging straight. This will prevent it from sagging or falling off the wall.
Adding Protection
If you’re hanging a particularly valuable or sentimental skateboard, consider adding extra protection to prevent scratches or damage. Cork or rubber padding can be placed between the wall and the deck.
Troubleshooting Tips
Unable to Hang on Drywall
Use drywall anchors rated for the weight of your skateboard. If the anchors don’t hold, try using longer screws or switching to wood screws.
Skateboard Sagging
Ensure that the screws are securely tightened and the wall anchors are holdingしっかりと締まっていることと、壁アンカーが保持していることを確認 . Add additional screws or use stronger anchors if necessary.
Uneven Surface
If the wall is uneven, use shims or washers behind the mounting hardware to level the skateboard out.
Screw Damage to Skateboard
Use a countersink bit to create a small recess for the screw heads to prevent damage to the deck. Alternatively, use washers between the screw heads and the deck.
Missing Hardware
Check your local hardware store or contact the skateboard manufacturer for replacement hardware.
Unsatisfactory Appearance
If the skateboard is not hanging as desired, try adjusting the height, spacing, or protection measures. Experiment with different arrangements to achieve the desired aesthetic.
Materials:
- Skateboard
- Mounting hardware
- Screws
- Measuring tape
- Pencil (optional)
Choosing a Location
Select a visible and easily accessible wall with enough space for the skateboard. Consider the height and angle so it’s easy to view.
Marking the Mounting Holes
Place the mounting hardware on the back of the skateboard and measure the distance between the holes. Transfer these measurements to the desired location on the wall using a measuring tape or pencil.
Drilling the Holes
Drill holes at the marked locations using a drill bit appropriate for the wall material. Ensure the holes are deep enough for the mounting hardware.
Installing the Mounting Hardware
Insert the mounting hardware into the drilled holes and secure them in place with screws.
Hanging the Skateboard
Align the skateboard with the mounted hardware and carefully place it onto the wall.
Fine-Tuning the Display
Adjust the screws on the mounting hardware to ensure the skateboard is securely attached and level.
Enjoy Your Displayed Skateboard
Step back and admire your newly displayed skateboard. It serves as a stylish and functional addition to your décor, reminding you of your passion for the sport.
How to Hang Your Skateboard On the Wall
Skateboards, often representing the unique personalities of those who ride them, have become increasingly popular decorative pieces for homes, offices, and even retail stores. The boards are seen displayed both horizontally and vertically. A skateboard on the wall can add a touch of street style to any room. Hanging your skateboard on the wall is a great way to display it and keep it out of the way when you’re not using it. Plus, it’s a relatively easy DIY project that can be completed in a few hours.
There are a few different ways to hang a skateboard on the wall. The most common method is to use screws or nails. You can also use adhesive hooks or clips. The best method for you will depend on the type of wall you have and the weight of your skateboard.
If you’re hanging your skateboard on a drywall wall, you’ll need to use screws or nails. To do this, first, mark the location of the holes on the wall. Then, use a drill to create pilot holes for the screws or nails. Next, insert the screws or nails into the pilot holes and tighten them until the skateboard is secure.
If you’re hanging your skateboard on a brick or concrete wall, you’ll need to use a hammer drill to create pilot holes for the screws or nails. Once you’ve created the pilot holes, insert the screws or nails into the holes and tighten them until the skateboard is secure.
If you’re using adhesive hooks or clips to hang your skateboard, be sure to follow the manufacturer’s instructions. Some adhesive hooks and clips are designed to hold a specific weight, so be sure to check the weight limit before you purchase them.
People Also Ask About How to Hang Your Skateboard on the Wall
How high should I hang my skateboard on the wall?
The height at which you hang your skateboard will depend on your personal preference. However, most people hang their skateboards at eye level or slightly higher.
Can I hang my skateboard on the wall without drilling holes?
Yes, you can hang your skateboard on the wall without drilling holes using adhesive hooks or clips. However, be sure to follow the manufacturer’s instructions carefully to ensure that the hooks or clips can support the weight of your skateboard.
What is the best way to display my skateboard on the wall?
The best way to display your skateboard on the wall will depend on your personal style and the space you have available. You can hang your skateboard horizontally, vertically, or even diagonally. You can also use different types of hooks or clips to create a unique display.
