7 Easiest Ways to Restart PC Using Cmd

by

Restart PC Using Cmd
$title$

A computer is an essential tool for many people. It can be used for work, school, or just for fun. But what happens when your computer freezes or won’t turn on? One possible solution is to restart your computer using the command prompt (CMD). This can be a quick and easy way to get your computer up and running again. In this article, we will show you how to restart your PC using CMD.

If you are able to access the command prompt, you can use the following steps to restart your computer:
1. Open the command prompt by pressing the Windows key + R, typing “cmd” into the Run box, and then pressing Enter.
2. Type the following command into the command prompt: shutdown /r /t 0
3. Press Enter.
Your computer will now restart.

If you are unable to access the command prompt, you can try restarting your computer using the following steps:
1. Press the power button on your computer and hold it for 10 seconds.
2. Release the power button and wait for your computer to turn off.
3. Press the power button again to turn your computer back on.

Initiating a Restart via Command Prompt

Restarting your PC using the Command Prompt offers a convenient and quick method to refresh your system without navigating through the Windows user interface. To initiate a restart via the Command Prompt, follow these steps:

  1. Launch the Command Prompt by typing “cmd” in the Windows search bar and selecting “Command Prompt” from the search results.
  2. In the Command Prompt window, type the following command:
    shutdown /r /t 0

    3. This command tells the computer to restart immediately, without any delay. You can modify the “/t” parameter to specify a delay in seconds before the restart occurs. For example, to delay the restart by 30 seconds, you would use the following command:
    shutdown /r /t 30

  3. Press Enter to execute the command. Your computer will begin the restart process as soon as possible.

Here’s a table summarizing the key parameters used in the “shutdown” command for restarting a PC:

Parameter Description
/r Specifies that the computer should be restarted.
/t Specifies a delay in seconds before the restart occurs.

Employing the Restart Command

The “shutdown” command is commonly used to restart a Windows computer through the Command Prompt. To employ this command, follow these steps:

  1. Open the Command Prompt by typing “cmd” into the Windows search bar and selecting the “Command Prompt” app.
  2. Type the following command into the Command Prompt window:

    shutdown /r /t 0

    The “/r” flag specifies a restart, and the “/t 0” flag indicates that the restart should occur immediately.

  3. Press the “Enter” key to execute the command and restart your computer.

    4. You can customize the restart command by modifying its flags. Here’s a table summarizing some commonly used flags:

    Flag Description
    /r Restart the computer.
    /t [seconds] Specify the number of seconds to wait before restarting. Use 0 to restart immediately.
    /c “[comment]” Add a comment to the shutdown or restart process.
    /f Force all running applications to close without warning.

    For example, to restart your computer with a 15-second delay and a comment, you would use the following command:

    shutdown /r /t 15 /c “Restarting for updates”

    Triggering a Restart with Taskkill and Start

    The taskkill command, often paired with start, offers a flexible approach to system restarts. Taskkill terminates specified processes, and start initiates the reboot sequence. Here’s the syntax:

    taskkill /IM [process-name].exe /F
    start "" "%windir%\System32\shutdown.exe" /r /t 0

    To use this method:

    1. Open the Command Prompt with administrative privileges.
    2. Enter the first command (taskkill) to terminate any conflicting processes, ensuring a clean reboot. Replace [process-name] with the actual process you wish to terminate, such as “explorer.exe” for File Explorer.
    3. Enter the second command (start) to initiate the reboot sequence. The parameters specify “/r” for restarting and “/t 0” for executing it immediately.

    **Advanced Usage:**

    The taskkill command accepts several advanced options to control the termination process:

    Option Description
    /S Specifies a remote computer to target.
    /U Specifies a user name for remote connections.
    /P Specifies a password for remote connections.
    /T Sets a time limit for process termination.

    By leveraging these options, you can tailor the restart process to your specific needs, such as remotely rebooting a system or setting a delay before the restart.

    Restarting with the WMIC Command

    The WMIC (Windows Management Instrumentation Command-line) command provides an alternative method to restart your PC. Here’s how to do it using WMIC:

    1. Open the Command Prompt as an administrator.

    2. Type the following command and press Enter:

    “`
    wmic computersystem where name=”%computername%” call reboot
    “`

    3. You’ll see a message confirming the restart:

    “`
    The command completed successfully.
    “`

    4. Your PC will restart automatically in a few seconds.

    5. **Advanced Options for WMIC Restart:**

    The WMIC command offers additional modifiers to customize the restart behavior. Here’s a table summarizing these options:

    For example, to restart your PC without any user interaction and display the shutdown dialog box, you can use the following command:

    “`
    wmic computersystem where name=”%computername%” call reboot /force /nointeractive /timeout:10
    “`

    Leveraging the PsShutdown Tool

    The PsShutdown tool, introduced in Windows 2000, offers a powerful command-line interface for managing system shutdown and restart operations. Its versatility extends beyond the basic shutdown command, providing control over various aspects of the shutdown process, including the ability to schedule restarts, display custom messages, and specify specific targets.

    Syntax

    The syntax of the PsShutdown tool is as follows:

    PsShutdown [-options]

    Options

    Numerous options can be used with PsShutdown to customize the shutdown process. Some of the most commonly used options include:

    • -s: Shut down the system
    • -r: Restart the system
    • -t: Specify the time (in seconds) to wait before executing the shutdown command
    • -m: Specify the reason for the shutdown
    • -f: Force running applications to close without waiting for them to finish

    Example: Restarting the System Immediately

    To restart the system immediately, you can use the following command:

    PsShutdown -r -t 0

    Example: Restarting the System with a Custom Message

    To restart the system and display a custom message, you can use the following command:

    PsShutdown -r -t 30 -m "System restart scheduled for maintenance"

    Example: Restarting a Remote System

    To restart a remote system, you can use the following command:

    PsShutdown -r -t 60 \\remote_computer

    | Option | Description | Default Value |
    |—|—|—|
    | -s | Shut down the system | None |
    | -r | Restart the system | None |
    | -t | Specify the time (in seconds) to wait before executing the shutdown command | 0 |
    | -m | Specify the reason for the shutdown | None |
    | -f | Force running applications to close without waiting for them to finish | False |

    Restarting Remotely using PSTools

    PSExec is a PSTools utility that allows you to execute processes remotely on other computers. It can be used to restart a remote computer by executing the following command:

    psexec \\computername -u username -p password shutdown -r -t 0

    Where:

    • \\computername is the name or IP address of the remote computer.
    • username is the username of an account with administrative privileges on the remote computer.
    • password is the password for the specified user.
    • -r is the restart option, it will reboot the remote computer.
    • -f is the force option, it will force the remote computer to restart if it is not responding.
    • -t 0 is the time option, it specifies the time in seconds before the remote computer restarts, in this case, it will restart immediately.

    Using the Shutdown Command

    You can also use the shutdown command to restart a remote computer. The syntax is as follows:

    shutdown -r \\computername -u username -p password

    Where:

    • -r is the restart option, it will reboot the remote computer.
    • \\computername is the name or IP address of the remote computer.
    • username is the username of an account with administrative privileges on the remote computer.
    • password is the password for the specified user.

    Using a Batch File

    You can create a batch file to restart a remote computer. The following is an example of a batch file that will restart a remote computer with the name “remotecomputer”:

    @echo off
psexec \\remotecomputer -u username -p password shutdown -r -t 0

    To use the batch file, simply save it with a .bat extension and run it. The batch file will execute the psexec command and restart the remote computer.

    Using a Scheduled Task

    You can create a scheduled task to restart a remote computer at a specific time. The following is an example of a scheduled task that will restart a remote computer with the name “remotecomputer” every day at 12:00 AM:

    Modifier Description
    /force Restarts the PC without displaying the shutdown dialog box.
    /nointeractive Prevents the user from being prompted to save unsaved data.
    /timeout:

    		Specifies a timeout in seconds before the restart occurs.
    Name: Restart Remote Computer
    Trigger: Daily, 12:00 AM
    Action: Run a program
    Program/script: psexec \\remotecomputer -u username -p password shutdown -r -t 0

    Scheduling a Restart with at Command

    The at command allows you to schedule a command to run at a specific time. This can be useful for restarting your PC at a time when you won’t be using it, such as overnight.

    To schedule a restart using the at command, open a command prompt and type the following command:

    at [time] /every:[interval] [command]

    Where:

    – [time] is the time you want the command to run. This can be specified in various formats, such as “hh:mm” for a specific time or “now + [interval]” to run the command after a certain amount of time.
    – [interval] is the interval at which you want the command to run. This can be specified in various formats, such as “daily”, “weekly”, or “monthly”.
    – [command] is the command you want to run. In this case, it would be “shutdown /r”, which will restart your PC.

    For example, to schedule a restart at 10 pm, you would type the following command:

    at 10:00pm /every:daily shutdown /r

    This command would restart your PC every day at 10 pm. You can also use the at command to schedule other tasks, such as running a script or sending an email.

    Setting Up a Scheduled Task

    In addition to using the at command, you can also set up a scheduled task to restart your PC. To do this, follow these steps:

    1. Open the Task Scheduler.
    2. Click on “Create Task”.
    3. Enter a name and description for the task.
    4. Select “Run whether user is logged on or not”.
    5. Select “Highest privileges”.
    6. Select “Triggers” and click on “New”.
    7. Select “On a schedule” and specify the time and interval at which you want the task to run.
    8. Select “Actions” and click on “New”.
    9. Enter “shutdown /r” in the “Program/script” field.
    10. Click on “OK” to save the task.

    Your PC will now restart at the specified time and interval.

    Restarting via Script Execution

    Another approach to restarting your PC using the Command Prompt is through script execution. This method involves creating a batch script, which is a text file containing a series of commands that the Command Prompt executes sequentially.

    To create a batch script for restarting your PC, follow these steps:

    1. Open a text editor like Notepad.
    2. Type the following command into the text editor:

    “`
    @echo off
    shutdown /r /t 0
    “`

    3. Save the file with the extension “.bat” (e.g., “restart.bat”).
    4. Close the text editor.

    To restart your PC using the batch script, follow these steps:

    1. Open the Command Prompt.
    2. Navigate to the folder where the batch script is located.
    3. Type the following command into the Command Prompt:

    “`
    start restart.bat
    “`

    The batch script will execute and restart your PC immediately.

    Here is a table summarizing the steps for restarting your PC using a batch script:

    Step Description
    1 Create a batch script with the following contents:
    “`
    @echo off
    shutdown /r /t 0
    “`
    2 Save the batch script with the extension “.bat”.
    3 Open the Command Prompt.
    4 Navigate to the folder where the batch script is located.
    5 Type the following command into the Command Prompt:
    “`
    start restart.bat
    “`
    6 The batch script will execute and restart your PC immediately.

    How to Restart PC Using CMD

    Restarting your PC using the command prompt (CMD) is a simple and effective method that you can use when you need to reboot your computer. Here are the steps you need to follow:

    1. Open Command Prompt by pressing the Windows key + R and typing “cmd” in the Run dialog box.
    2. Type “shutdown /r” in the Command Prompt window and press Enter.
    3. Your PC will begin to restart.

    People Also Ask About How to Restart PC Using CMD

    How to restart PC using CMD with timeout?

    You can use the “/t” switch to specify a timeout period in seconds before the restart occurs. The syntax is “shutdown /r /t “, where is the timeout period in seconds.

    How to restart PC using CMD in Windows 10?

    The steps to restart PC using CMD are the same in Windows 10 as they are in other versions of Windows.

    How to restart PC using CMD in Safe Mode?

    To restart your PC in Safe Mode using CMD, you can use the “/safeboot” switch. The syntax is “shutdown /r /safeboot”.